Pumper Fire Truck

 

Pumper Fire Truck is modified from the domestic famous brand fire engine special chassis. It is equipped with 400L/s flow diesel engine fire pump set, 12m straight arm telescopic crane, 60m high pressure oil inlet and oil return hydraulic hose reel. The two models are XB5/200 floating boat pump. 

 

It is mainly used for remote water supply systems, as well as large-scale fires such as oil, chemical, factories and mines, warehouses, etc. The flood disaster site can be used as a dump truck, and it is the first choice for firefighting units and enterprise firefighting units in China.

 

 

Large flow rate ---end water supply flow ≥ 400 L / S, water supply distance 3000 meters (double trunk line);

 

Take the water depth --- the maximum water withdrawal depth of the system can reach 25m;

 

Light weight --- the system suction pump does not exceed 110kg (single unit);

 

Efficient and labor-saving --- the system adopts "post-mounted crane to hang the water-absorbing module to the water source of several tens of meters deep", retracts and suspends, drags and sucks the water-absorbing module and water hose, and the front-end take-up machine can automatically recover the water belt. The surface of the water belt can be cleaned and dried as needed, and the operation is simple and efficient;

 

Good environmental adaptability - the crane behind the system can meet the needs of vertical bridge deck and dock water intake;

 

The water supply flow is large --- the maximum water supply flow rate can reach 400L/S and the water supply distance can reach 3000 meters after being pressurized.

Strong versatility --- accessories such as system interfaces adopt international standards, complete configuration, strong versatility and good interchangeability;

High safety --- the system is equipped with fault alarm, emergency stop, anti-skid, anti-collision, safety signs and other measures, high security

High reliability --- the booster pump used in the system is highly reliable and can be used with confidence

 

Vehicle   parameters	Dimensions：11450×2500×3980
Total   vehicle quality：	30000kg
Chassis   parameters	Model：ZZ5356V524HE1
Drive   type：	6×4
Power：	397KW
Wheelbase：	5800+1400mm
Floating   boat pump parameters	Model   XB5/200
Flow：	200L/s(Two   sets total 400L/s)
Hydraulic motor working pressure	26MPa
The maximum depth of water intake is 25 meters and the horizontal distance is 60 meters.
Outlet pressure	0.25MPa
Water supply hose diameter	250mm
Booster   pump parameters	Model：SSCXB300-250
Flow：	400L/s  at   1.0MPa
Outlet	water hose diameter 300mm
Boom system	Maximum   working range：12m
The   most significant lifting quality：	500kg
Swing   angle：	360°   full rotation
System   rated working pressure：	20Mpa
Independent   diesel engine parameters	Rated   power：759KW
Rated   speed：	1800r/min
Speed   control mode:	electronic speed control
Hydraulic reel	Drive   form: hydraulic motor
Hose length:	60 meters each for high pressure inlet pipe and low pressure return   pipe

 

 

Hot Tags: pumper fire truck, China, factory, suppliers, manufacturers