Jun 23, 2019 Leave a message

Fire safety knowledge of flammable and explosive chemicals.

What is a flammable and explosive chemical?


Inflammable and explosive chemicals refer to compressed gas and liquefied gas, flammable liquid, flammable solid, pyrophoric and wet flammable materials with the main characteristics of combustion explosion in the national standard GB12268-90 "Dangerous Goods Name List". Some flammable and explosive chemicals in oxidants and organic peroxides, poisons and corrosives.


What are the conditions for the production and use of flammable and explosive chemical units and employees?


1. The buildings and places where flammable and explosive chemicals are produced and used must comply with the fire codes for building design and relevant professional fire codes;


2. Sites that produce and use flammable and explosive chemicals must install lightning protection facilities in accordance with relevant regulations;


3. Electrical equipment used in the production and use of flammable and explosive chemicals must comply with the national electrical explosion-proof standards;


4. The production equipment and devices must be equipped with fire safety facilities in accordance with relevant state regulations, and regularly maintained and verified;


5. For production equipment and devices that are prone to static electricity, electrostatic discharge facilities must be set up according to regulations and checked regularly;


6. Personnel engaged in the production of inflammable and explosive chemicals must be trained in fire safety by the competent department, and obtain a certificate after passing the examination.


What are the conditions for flammable and explosive chemical storage?


1. Dedicated warehouses, freight yards or other special storage facilities must be managed by qualified personnel who have passed the fire safety training;


2. It shall be classified and stored in accordance with GB12268-90 "Dangerous Goods Name List", and flammable and explosive chemicals with different chemical properties or different fire extinguishing methods shall not be stored in the same warehouse;


3. The storage unit of flammable and explosive chemicals must establish the storage acceptance, delivery inspection, and storage registration system. Where the packaging and markings do not meet the national standards, or damage, incompleteness, leakage, deformation, deterioration of the articles, decomposition It is strictly forbidden to enter or leave the warehouse;


4. The flammable and explosive chemical warehouse management personnel must check the “inflammable and explosive chemical transportation permit” of the delivery unit when delivery, and the “inflammable and explosive chemical transportation permit” may not be shipped.


What regulations should be followed for the transport of flammable and explosive chemicals?


1. The transport unit and individual must strictly inspect the shipment, and the flammable and explosive chemicals that are not tightly packed, damaged, the name label, the mark is not obvious, the tank that does not meet the safety requirements, and the gas cylinder that does not have the bottle cap shall not be shipped. ;


2. Handle gently to prevent collision, dragging and dumping;


3. Vehicles and ships that transport inflammable and explosive chemicals must be thoroughly cleaned and rinsed before they can continue to ship other dangerous goods;


4. Flammable and explosive chemicals whose chemical properties and fire-extinguishing methods conflict with each other shall not be mixed and shipped;


5. Chemicals that are prone to cause burning, explosion, or toxic gases when heated, are scheduled for transportation in the summer, and should be transported at night. Insulation and cooling measures should be taken when necessary;


6. Chemicals that are likely to cause burning, explosion or toxic gases when exposed to moisture should not be transported on rainy days. If it is necessary to transport, in addition to good handling conditions, there should be moisture and rain protection measures.


What are the duties that flammable and explosive units should perform?


In accordance with the "Implementation Measures for Fire Safety Responsibility System" issued by the General Office of the State Council, inflammable and explosive units shall perform the following duties in addition to performing fire management duties of general units:


1. Regularly hold regular fire safety work meetings to study the fire protection work of the unit and deal with major issues involving firefighting investment, firefighting equipment purchase, and fire hazard rectification;


2. Encourage the fire safety manager to obtain the qualification of the registered fire engineer. The fire safety person and the special type of personnel must be trained in fire safety. The operator of the automatic fire protection facility should obtain the qualification certificate for the building (structure) building firefighter;


3. The full-time fire brigade or micro-fire station shall be equipped with appropriate fire-fighting equipment according to the fire hazard characteristics of the unit, reserve sufficient fire-fighting and rescue pharmacy and materials, and regularly organize fire-fighting business learning and fire-fighting skills training;


4. Equipped with emergency escape facilities and evacuation guidance equipment in accordance with national standards;


5. Establish a fire safety assessment system, which will be evaluated regularly by qualified institutions, and the results of the assessment will be made public.


Send Inquiry

Home

Phone

E-mail

Inquiry